GLASS BRICK 1.3 Watt 18 LEDS RGB 100x100x60

Our colour changing, LED Glass Bricks are fully weather resistant, have automatic colour changing and colour control. Used in buildings, floors, pathways, pergolas, retaining walls, all entertaining area or as far as your imagination will take you.

GENERAL INFORMATION
 Colour Range:   Full Colour Spectrum  3.6 Million colours.

LED:                  18 LEDs   6 Red,  6 Green, 6 Blue

Glass:                12 mm thickness, Toughened motley glass.

Wiring:               4-core cable, which enters from the bottom. 

                          (Each brick supplied with 7m of cable)

Casing:              Solid glass.

LED Angle:        120 Degrees diffused

 

Features:        - Glass brick can withstand approx 1.8 tons.

                        -  Lock on to any colour you choose.

TEMPERATURE /  IP RATING

 Temperature:    Approximately –35°C to 75°C

          IP Rating:          IP 67 Rating Weather resistant 

 POWER SUPPLY

 Power Supply:             24 Volts DC Output 

                                     240 Volts AC 50Hz input

Power Consumption:    1.3 Watts per brick

Power:                          24 Volts per brick

LED:Programmed for automatic  colour changing, built into transformer. Includes Manual colour lock button

Life of LED Bulb:

Under controlled Australian environmental conditions and normal operating circumstances, according to LED manufacturers specifications our LED glass bricks are expected to last approximately 100,000 hours. Customers can expect a slight depreciation in brightness in the estimated 100,000 hours lifetime.